|
GRADO
Laboratories
PHONO
CARTRIDGES |
 |
STATEMENT
SERIES
1/2"
Mount Low Output Audiophile Cartridges |
THE
STATEMENT
Moving Iron
- Frequency Response:
5 Hz. - 75 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 45 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
0.5mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
2 mH.
- Resistance:
2 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
Factory Re-Tip Only.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
7.0 grams.
GRADO MAKES THEIR STATEMENT!
" After years of careful thought and painstaking design Grado is very pleased to offer their flagship phono cartridge. We are so proud of this cartridge and believe that it has so much to say about Grado technology, that we decided to name it the GRADO STATEMENT. The STATEMENT utilizes gold coil wires, a boron cantilever and a diamond cut specially for
Grado. All this is hand-assembled within a machined Australian Jarrah wood housing. The output for the STATEMENT measures at 0.75 mV. The lowest output ever offered by
Grado. The low frequency information and its portrayal of bass dynamics are solid, powerful and authoritative. The midrange is rich, complex and highly believable. Its top-end seems to extend forever with speed and remarkable delicacy. Imaging is detailed and precise with a sound stage that wraps its arms around you and draws you into the music. Michael Fremer commented in his Analog Corner, "It is among the finest cartridges I've ever heard at any price", Stereophile 3/99, pg. 41. While Jonathan Valin stated, "I'm going to keep the Statement in my
reference system" The Absolute Sound, Issue 118. Anyone who was impressed with our previous top-of-the-line effort, the Grado REFERENCE, will have their eyes opened wide after listening to the GRADO STATEMENT!"
|
Headshell NOT Included
|
|
$ 2,237.50 Each
EACH |
THE
REFERENCE
Moving Iron
- Frequency Response:
10 Hz. - 60 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 40 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
0.5mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
2 mH.
- Resistance:
2 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
Factory Re-Tip Only.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
6.5 grams.
The Grado Reference
"The Master and Reference models use a five piece OTL cantilever technology achieving an additional 5% tip mass reduction over the Platinum and Sonata models. The coils are wound with ultra-high purity long crystal
(UHPLC) oxygen free copper wire. The Master model is mounted with Grado's specially designed nude elliptical diamond, and the Reference model uses Grado's true ellipsoid design diamond."
|
|
|
$ 1,074.10 Each
EACH |
THE
MASTER
Moving Iron
- Frequency Response:
10 Hz. - 60 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 40 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
0.5mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
Factory Re-Tip Only.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
6.5 grams.
The Grado
Master
"The Master and Reference models use a five piece OTL cantilever technology achieving an additional 5% tip mass reduction over the Platinum and Sonata models. The coils are wound with ultra-high purity long crystal
(UHPLC) oxygen free copper wire. The Master model is mounted with Grado's specially designed nude elliptical diamond, and the Reference model uses Grado's true ellipsoid design diamond."
|
|
|
$ 716.45 Each
EACH |
SONATA
Moving Iron
- Frequency Response:
10 Hz. - 60 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 40 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
0.5mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Nude Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
Factory Re-Tip Only.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
6.5 grams.
The Grado
Sonata
"The Platinum and Sonata models use a modified four piece OTL cantilever technology achieving a 10% tip mass reduction over the Prestige series and ultra-high purity long crystal
(UHPLC) oxygen free copper wire in the coils. The Sonata model uses Grado's specially designed nude elliptical diamond."
|
|
|
$ 447.50 Each
EACH |
PLATINUM
Moving Iron
- Frequency Response:
10 Hz. - 60 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 40 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
0.5mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
Factory Re-Tip Only.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
6.5 grams.
The Grado
Platinum
"The Platinum and Sonata models use a modified four piece OTL cantilever technology achieving a 10% tip mass reduction over the Prestige series and ultra-high purity long crystal
(UHPLC) oxygen free copper wire in the coils. The Platinum model uses Grado's specially designed elliptical diamond mounted on a brass
bushing."
|
|
|
$ 268.50 Each
EACH |
REFERENCE
SERIES
1/2"
Mount High
Output Audiophile Cartridges |
THE
REFERENCE
Moving Iron
- Frequency Response:
10 Hz. - 60 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 40 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
Factory Re-Tip Only.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
6.5 grams.
The Grado Reference
"The Master and Reference models use a five piece OTL cantilever technology achieving an additional 5% tip mass reduction over the Platinum and Sonata models. The coils are wound with ultra-high purity long crystal
(UHPLC) oxygen free copper wire. The Master model is mounted with Grado's specially designed nude elliptical diamond, and the Reference model uses Grado's true ellipsoid design diamond."
|
|
|
$ 1,074.10 Each
EACH |
THE
MASTER
Moving Iron
- Frequency Response:
10 Hz. - 60 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 40 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
Factory Re-Tip Only.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
6.5 grams.
The Grado
Master
"The Master and Reference models use a five piece OTL cantilever technology achieving an additional 5% tip mass reduction over the Platinum and Sonata models. The coils are wound with ultra-high purity long crystal
(UHPLC) oxygen free copper wire. The Master model is mounted with Grado's specially designed nude elliptical diamond, and the Reference model uses Grado's true ellipsoid design diamond."
|
|
|
$ 716.45 Each
EACH |
SONATA
Moving Iron
- Frequency Response:
10 Hz. - 60 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 40 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Nude Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
Factory Re-Tip Only.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
6.5 grams.
The Grado
Sonata
"The Platinum and Sonata models use a modified four piece OTL cantilever technology achieving a 10% tip mass reduction over the Prestige series and ultra-high purity long crystal
(UHPLC) oxygen free copper wire in the coils. The Sonata model uses Grado's specially designed nude elliptical diamond."
|
|
|
$ 447.50 Each
EACH |
PLATINUM
Moving Iron
- Frequency Response:
10 Hz. - 60 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 40 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
Factory Re-Tip Only.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
6.5 grams.
The Grado
Platinum
"The Platinum and Sonata models use a modified four piece OTL cantilever technology achieving a 10% tip mass reduction over the Prestige series and ultra-high purity long crystal
(UHPLC) oxygen free copper wire in the coils. The Platinum model uses Grado's specially designed elliptical diamond mounted on a brass
bushing."
|
|
|
$ 268.50 Each
EACH |
SENATOR
SERIES
1/2"
Mount Very High Output Audiophile
Cartridge |
SENATOR
High Output Moving Coil
- Frequency Response:
18 Hz. - 24 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 20 dB.
- Input Load:
Any value above 5 k Ohms..
- Output at 1KHz 5CM/sec.:
6.0mV.
- Recommended Tracking
Force: 3.0 Grams.
- Stylus Type:
Elliptical.
- Impedance:
950 Ohms.
- Resistance:
950 Ohms.
- Compliance CUs:
8x10-6 (Operating Range
Only).
- Stylus Replacement:
No User Replaceable Stylus.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
5.5 grams.
The
SENATOR
"The Grado SENATOR stereo
cartridge is an extremely high quality unit, employing the moving coil
principle. This electro-dynamic stereo cartridge uses an entirely
new method of measurement, which automatically corrects for vinyl
resonance problems in musical recordings. Many years of watch-making
and electronic experience insure precision manufacture of the highest
order."
Vintage phono cartridges are sold "As Is." |
|
|
$ 175.56 Each
EACH |
PRESTIGE
SERIES
1/2"
Mount Audiophile Cartridges |
GOLD
Moving Iron
- Frequency Response:
10 Hz. - 60 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 35 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
5.5 grams.
The Prestige Gold
"The Silver and Gold models use a four piece OTL cantilever technology, ultra-high purity long crystal
(UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold model is selected from the Silver production run and meet higher test specifications. Approximately 5% of the production run meet these standards and become Gold models."
|
|
|
$ 161.10 Each
EACH |
SILVER
Moving Iron
- Frequency Response:
10 Hz. - 60 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 35 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
5.5 grams.
The Prestige Silver
"The Silver and Gold models use a four piece OTL cantilever technology, ultra-high purity long crystal
(UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing."
|
|
|
$ 134.25 Each
EACH |
RED
Moving Iron
- Frequency Response:
10 Hz. - 55 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 30 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
5.5 grams.
The Prestige
Red
"The Blue and Red models use a four piece OTL
cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical
diamond mounted on a brass bushing. The Red model is selected from the Blue production run and
meet higher test specifications. Approximately 10% of the production run will meet these standards and
become Red models."
|
|
|
$ 98.45 Each
EACH |
BLUE
Moving Iron
- Frequency Response:
10 Hz. - 55 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 30 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
5.5 grams.
The Prestige
Blue
"The Blue and Red models use a four piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing."
|
|
|
$ 71.60 Each
EACH |
GREEN
Moving Iron
- Frequency Response:
10 Hz. - 50 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 30 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
5.5 grams.
The Prestige
Green
"The Black and Green models use a three piece
OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed
elliptical diamond mounted in a brass bushing. The Green model is selected from the Black production
run and meet higher test specifications. Approximately 15% of the production run will meet
these standards and become Green models."
|
|
|
$ 53.75 Each
EACH |
BLACK
Moving Iron
- Frequency Response:
10 Hz. - 50 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 30 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
5.5 grams.
The Prestige
Black
"The Black and Green models use a three piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted in a brass bushing."
|
|
|
$ 35.80 Each
EACH |
PRESTIGE
SERIES
"P"
Mount Audiophile Cartridges |
GOLD
P
Moving Iron
- Frequency Response:
10 Hz. - 60 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 35 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
"P" Mounting.
- Net Weight:
5.5 grams.
The Prestige Gold
"The Silver and Gold models use a four piece OTL cantilever technology, ultra-high purity long crystal
(UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Gold model is selected from the Silver production run and meet higher test specifications. Approximately 5% of the production run meet these standards and become Gold models."
|
|
|
$ 161.10 Each
EACH |
SILVER
P
Moving Iron
- Frequency Response:
10 Hz. - 60 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 35 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
"P" Mounting.
- Net Weight:
5.5 grams.
The Prestige Silver
"The Silver and Gold models use a four piece OTL cantilever technology, ultra-high purity long crystal
(UHPLC) oxygen free copper wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing."
|
|
|
$ 134.25 Each
EACH |
RED
P
Moving Iron
- Frequency Response:
10 Hz. - 55 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 30 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
"P" Mounting.
- Net Weight:
5.5 grams.
The Prestige
Red
"The Blue and Red models use a four piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing. The Red model is selected from the Blue production run and meet higher test specifications. Approximately 10% of the production run will meet these standards and become Red models."
|
|
|
$ 98.45 Each
EACH |
BLUE
P
Moving Iron
- Frequency Response:
10 Hz. - 55 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 30 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
"P" Mounting.
- Net Weight:
5.5 grams.
The Prestige
Blue
"The Blue and Red models use a four piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted on a brass bushing."
|
|
|
$ 71.60 Each
EACH |
GREEN
P
Moving Iron
- Frequency Response:
10 Hz. - 50 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 30 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
"P" Mounting.
- Net Weight:
5.5 grams.
The Prestige
Green
"The Black and Green models use a three piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted in a brass bushing. The Green model is selected from the Black production run and meet higher test specifications. Approximately 15% of the production run will meet these standards and become Green models."
|
|
|
$ 53.75 Each
EACH |
BLACK
P
Moving Iron
- Frequency Response:
10 Hz. - 50 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 30 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force:
1.5 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Compliance CUs:
20.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
"P" Mounting.
- Net Weight:
5.5 grams.
The Prestige
Black
"The Black and Green models use a three piece OTL cantilever technology, standard oxygen free wire in the coils and Grado's specially designed elliptical diamond mounted in a brass bushing."
|
|
|
$ 35.80 Each
EACH |
PRESTIGE
SERIES
1/2"
Mount MONO 78-RPM Cartridges |
78E
Moving Iron
- Frequency Response:
10 Hz. - 50 kHz.
- Transmission
Principal: Moving Iron.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force Range: 2.0 - 5.0 Grams.
- Stylus Type:
3.0 mil.
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
5.5 grams.
Mono 78-RPM Phono
Cartridge
"The Prestige Series of 78-RPM cartridges are designed for high output and excellent stability under even severe use. Each cartridge can be used for either archival or casual play without concern for undue wear on the record. All Grado 78 cartridges have a considerable reduction in tip mass resulting in extended frequency response while tracking forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest 78-rpm cartridges in the world." "The Prestige model 78E uses a modified four piece
OTL cantilever technology, oxygen free wire in the coils and a specially designed,
high polished, elliptical 3 mil. diamond mounted in a brass bushing."
|
|
|
$ 116.35 Each
EACH |
78C
Moving Iron
- Frequency Response:
10 Hz. - 50 kHz.
- Transmission
Principal: Moving Iron.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force Range: 2.0 - 5.0 Grams.
- Stylus Type:
3.0 mil. Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
Standard 1/2"
(12.7mm) Mounting Centers.
- Net Weight:
5.5 grams.
Mono 78-RPM Phono
Cartridge
"The Prestige Series of 78-RPM cartridges are
designed for high output and excellent stability under even severe use. Each cartridge
can be used for either archival or casual play without concern for undue wear on the record. All Grado 78 cartridges
have a considerable reduction in tip mass resulting in extended frequency response while tracking
forces can range from 2-5 grams. The experts acclaim these cartridges as virtually the finest
78-rpm cartridges in the world." "Model 78C
The Prestige model 78C uses a three-piece OTL cantilever technology, oxygen free
wire in the coils and a specially designed, high polished conical/spherical 3 mil. diamond mounted
in a brass bushing."
|
|
|
$ 71.60 Each
EACH |
PRESTIGE
SERIES
1/2"
& "P" Mount MONO Cartridges |
ME+
Moving Iron
- Frequency Response:
10 Hz. - 50 kHz.
- Transmission
Principal: Moving Iron.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force Range: 2.0 - 5.0 Grams.
- Stylus Type:
1.0 mil.
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
Universal Mount that is convertible to Standard 1/2" (12.7mm)
Mounting Centers or P-Mount.
- Net Weight:
5.5 grams.
Mono Phono
Cartridge
"There are many analog lovers with record collections that include mono albums. At Grado we strive to have products that will fit all the needs of the analog enthusiast. So now, Grado offers two new cartridge models in a mono version. The MC+ is mounted with a 1mil conical diamond. The ME+ is mounted with a 1mil
elliptical and uses one of GRADO's upgraded generating systems. All wooden body cartridges are available in mono version. This will make your records quieter and enhance the musical pleasure of these recordings." "The Prestige model ME+ uses a modified four piece
OTL cantilever technology, oxygen free wire in the coils and a specially designed,
high polished, elliptical 1 mil. diamond mounted in a brass bushing."
|
|
|
$ 116.35 Each
EACH |
MC+
Moving Iron
- Frequency Response:
10 Hz. - 50 kHz.
- Transmission
Principal: Moving Iron.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force Range: 2.0 - 5.0 Grams.
- Stylus Type:
1.0 mil.
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
Universal Mount that is convertible to Standard 1/2" (12.7mm)
Mounting Centers or P-Mount.
- Net Weight:
5.5 grams.
Mono Phono
Cartridge
"There are many analog lovers with record
collections that include mono albums. At Grado we strive to have products that will fit all the
needs of the analog enthusiast. So now, Grado offers two new cartridge models in a mono version. The MC+ is
mounted with a 1mil conical diamond. The ME+ is mounted with a 1mil elliptical
and uses one of GRADO's upgraded generating systems. All wooden body cartridges are available in mono version. This
will make your records quieter and enhance the musical pleasure of these recordings." "The Prestige model MC+ uses a three-piece OTL
cantilever technology, oxygen free wire in the coils and a specially designed,
high polished conical/spherical 1 mil. diamond mounted in a brass bushing."
|
|
|
$ 71.60 Each
EACH |
PRESTIGE
SERIES
1/2" &
"P"
Mount DJ Phono Cartridges |
DJ200i
Moving Iron
- Frequency Response:
10 Hz. - 50 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 30 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force Range: 2.0 - 5.0 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
Universal Mount that is convertible to Standard 1/2" (12.7mm)
Mounting Centers or P-Mount.
- Net Weight:
5.5 grams.
DJ Phono
Cartridge
"Grado Labs announces the release of their new DJ
series of professional phono cartridge. Built and designed to meet the demanding needs of the
professional DJ musician, these cartridges deliver performance never known before in the pro DJ
market. The Grado specially engineered transmission line cantilever allows for the
ideal transfer of music signal and for safe and effective stylus back-cueing. The DJ series can track from 2
to 5 grams, and delivers the warm musical Grado sound the audio industry has embraced and
enjoyed for 50 years. The DJ series incorporates our newest Flux-Bridger generator systems for lower effective tip
mass and lower electrical inductance. Each DJ series cartridge is hand assembled to
Grado's high standards, which contributes to the unchallenged consistency of performance, and the Grado
guarantee of reliability. The DJ series of cartridges are the most advanced phono pickups
ever offered to the professional DJ market, without exception. Cartridges are packed by themselves. Stylus
replacements are packages with two replacements." "The Prestige model DJ200 uses a modified four
piece OTL cantilever technology, oxygen free wire in the coils and a specially
designed, high polished, elliptical diamond mounted in a brass bushing."
|
|
|
$ 98.45 Each
EACH |
DJ100i
Moving Iron
- Frequency Response:
10 Hz. - 50 kHz.
- Transmission
Principal: Moving Iron.
- Channel
Separation at 1 kHz.: 30 dB.
- Input Load:
47 k.
- Output at 1KHz 5CM/sec.:
5.0mV.
- Recommended Tracking
Force Range: 2.0 - 5.0 Grams.
- Stylus Type:
Elliptical.
- Inductance:
45 mH.
- Resistance:
475 Ohms.
- Stylus Replacement:
User Replaceable Stylus.
- Mounting:
Universal Mount that is convertible to Standard 1/2" (12.7mm)
Mounting Centers or P-Mount.
- Net Weight:
5.5 grams.
DJ Phono
Cartridge
"There are many analog lovers with record collections that include mono albums. At Grado we strive to have products that will fit all the needs of the analog enthusiast. So now, Grado offers two new cartridge models in a mono version. The MC+ is mounted with a 1mil conical diamond. The ME+ is mounted with a 1mil
elliptical and uses one of GRADO's upgraded generating systems. All wooden body cartridges are available in mono version. This will make your records quieter and enhance the musical pleasure of these recordings." "The Prestige model DJ100 uses a three-piece OTL
cantilever technology, oxygen free wire in the coils and a specially designed,
high polished, elliptical diamond mounted in a brass bushing."
|
|
|
$ 53.70 Each
EACH |
PRESTIGE
SERIES
1/2"
Mount Audiophile Cartridges |
Return to CARTRIDGE HOME PAGE |
PHONO CARTRIDGE STYLUS REPLACEMENTS |
