Goldring Phono Cartridge Home Page

BLUZ BROZ.

ENTERTAINMENT
Order Line (800) 530-3857 Phone (954) 938-2006 FAX (954) 772-0977

GOLDRING

Home Stereo
Phono Cartridges
Stop by frequently, we are adding more merchandise daily.

GOLDRING
PHONO CARTRIDGES

1/2" Mount Low Output Audiophile Moving Coil Cartridges

LEGACY
Low Output Moving Coil

TRANSDUCER CHARACTERISTICS

Frequency Response: 20 Hz. - 22 kHz. +/-3dB
Channel Balance: 1 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: 25 dB. at 1 kHz. @ 5 cm/sec.
Sensitivity: 0.25 mV. +/-1dB at 1 kHz.
Static Compliance: 16mm/N.
Vertical Tracking Angle: 20°.
Stylus Radius: Vital Fine Line.
Stylus Type: Non-Replaceable.

ELECTRICAL CHARACTERISTICS

Load Resistance: 100 Ohms.
Load Capacitance: 100 - 1,000 pF Internal.
Inductance: 3 mH.
Internal Resistance: 7 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 8 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.75 Grams.

GOLDRING LEGACY SERIES

“To ensure a cartridge reproduces an accurate transcription of the record groove, the cartridge components must be rigidly mounted to the tonearm, while simultaneously allowing the tiniest movements of the diamond stylus to be transmitted, via the cantilever, to the sensing coils. The Legacy boasts an ultra low resonance magnesium metal body, which is both very light and extremely strong. For convenience and rigidity, it has threaded inserts allowing the cartridge to be easily mounted and accurately aligned into the headshell. The stylus is a very low mass 'Vital' fine line diamond, which is highly polished and gives extremely low distortion. To maintain rigidity, this is attached to a hard alloy cantilever, which transfers the maximum level of detail from the diamond to the coils; the latter are hand wound using only the highest purity copper. To achieve the optimum compliance required to deliver a smooth, extended frequency response, the stylus damper is formed from a bespoke rubber mixture. Lastly, a precision, rare earth, Neodymium iron boron magnet helps deliver outstanding dynamics.”

PLEASE NOTE: This cartridge requires a MC setting on your preamplifier or integrated amplifier. If absent, it requires a separate outboard Moving Coil Preamplifier.

Your Net Price

$1,145.43

Each

ELITE
Low Output Moving Coil

TRANSDUCER CHARACTERISTICS

Frequency Response: 20 Hz. - 30 kHz. +/-2dB
Channel Balance: 1 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: 25 dB. at 1 kHz. @ 5 cm/sec.
Sensitivity: 0.5 mV. +/-1dB at 1 kHz.
Static Compliance: 18mm/N.
Equivalent Tip Mass: Gyger I.
Vertical Tracking Angle: 20°.
Stylus Radius: 0.35 mg.
Stylus Type: Non-Replaceable.

ELECTRICAL CHARACTERISTICS

Load Resistance: 100 Ohms.
Load Capacitance: 100 - 500 pF Internal.
Inductance: 2 mH.
Internal Resistance: 8 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 5.7 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.75 Grams.

GOLDRING ELITE CARTRIDGE

“The Elite is an ultra high-performance low-output moving coil cartridge which incorporates Goldring’s most recent design features. These include new magnetic circuitry, an ultra-rigid Pocan body and a Neodymium magnet.

The Elite incorporates a Gyger 1 line contact stylus, providing maximum groove information retrieval and an outstandingly smooth and extended response. Optimum damping on both channels is achieved by symmetrically winding the low-mass armature. Silver wire is used for the coils, which supplies much higher definition than is found in standard cartridge construction.

The Elite represents the very best in British audio technology and design.”

PLEASE NOTE: This cartridge requires a MC setting on your preamplifier or integrated amplifier. If absent, it requires a separate outboard Moving Coil Preamplifier.

Your Net Price

$ 796.05

Each

EROICA LX
Low Output Moving Coil

TRANSDUCER CHARACTERISTICS

Frequency Response: 20 Hz. - 22 kHz. +/-3dB
Channel Balance: 1 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: 25 dB. at 1 kHz. @ 5 cm/sec.
Sensitivity: 0.5 mV. +/-1dB at 1 kHz.
Static Compliance: 18mm/N.
Equivalent Tip Mass: Gyger I.
Vertical Tracking Angle: 20°.
Stylus Radius: 0.35 mg.
Stylus Type: Non-Replaceable.

ELECTRICAL CHARACTERISTICS

Load Resistance: 47,000 Ohms.
Load Capacitance: 100 - 500 pF Internal.
Inductance: 0.2 mH.
Internal Resistance: 77 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 5.5 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.7 Grams.

GOLDRING EROICA LX CARTRIDGE

“The Eroica is a true audiophile moving coil cartridge which features an advanced pole shoe design using a powerful rare earth Neodymium magnet. This unique construction allows a shortened magnetic path, which helps reduce the amount of iron in the cartridge, keeping the weight down to just 5.5gms. Rigidity is also of prime importance and the Pocan body of the cartridge enables it to be clamped solidly to the headshell, keeping energy losses to an absolute minimum. This cartridge uses a Gyger II line contact stylus width a low output. The Eroica offers an exceptionally high standard of performance and reliability.”

PLEASE NOTE: This cartridge requires a MC setting on your preamplifier or integrated amplifier. If absent, it requires a separate outboard Moving Coil Preamplifier.

Your Net Price

$ 663.37

Each

1/2" Mount High Output Audiophile Moving Coil Cartridges

EROICA H
High Output Moving Coil

TRANSDUCER CHARACTERISTICS

Frequency Response: 20 Hz. - 22 kHz. +/-3dB
Channel Balance: 1 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: 25 dB. at 1 kHz.
Sensitivity: 2.5 mV. +/-1dB at 1 kHz. @ 5 cm/sec.
Static Compliance: 18mm/N.
Equivalent Tip Mass: Gyger II.
Vertical Tracking Angle: 20°.
Stylus Radius: 0.35 mg.
Stylus Type: Non-Replaceable.

ELECTRICAL CHARACTERISTICS

Load Resistance: 100 Ohms.
Load Capacitance: 100 - 1,000 pF Internal.
Inductance: 12 mH.
Internal Resistance: 8 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 5.5 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.7 Grams.

GOLDRING EROICA H CARTRIDGE

“The Eroica is a true audiophile moving coil cartridge, which features an advanced pole shoe design using a powerful rare earth Neodymium magnet. This unique construction allows a shortened magnetic path, which helps reduce the amount of iron in the cartridge, keeping the weight down to just 5.5gms. Rigidity is also of prime importance and the Pocan body of the cartridge enables it to be clamped solidly to the headshell, keeping energy losses to an absolute minimum. This cartridge uses a Gyger II line contact stylus with a high output. The Eroica offers an exceptionally high standard of performance and reliability.”

Your Net Price

$ 663.37

Each

1/2" Mount Vintage High Output Audiophile Cartridge

G950 E
High Output Moving Iron

TRANSDUCER CHARACTERISTICS

Frequency Response: 10 Hz. - 20 kHz. +/-3dB
Channel Balance: <2 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: >25 dB. at 1 kHz.
Sensitivity: 6.0 mV. +/-1dB at 1 kHz. @ 5 cm/sec.
Static Compliance: 25mm/N.
Equivalent Tip Mass: 1.2mg.
Vertical Tracking Angle: 26°.
Stylus Radius: 0.3 mil. x 0.7 mil. Elliptical Configuration.
Stylus Type: User Replaceable.

ELECTRICAL CHARACTERISTICS

Load Resistance: 47,000 Ohms.
Load Capacitance: 200 - 400 pF Internal.
Inductance: 400 mH. at 1 kHz.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 5.0 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.25 - 1.75 Grams.
Recommended Tracking Force (Nominal): 1.5 Grams.

GOLDRING G-950E CARTRIDGE

“The G950 E is a prime example of a vintage audiophile moving iron cartridge. The unique construction allows this cartridge to be used on both vintage turntables as well as the most modern audiophile turntables with outstanding results. We have reduced the amount of iron in the cartridge, keeping the weight down to a mere 5 grams. Rigidity is also of prime importance and the body of the cartridge is to be clamped solidly to the headshell, keeping energy losses to an absolute minimum. This cartridge uses a fine elliptical stylus with a high output. The G950 E offers an exceptionally high standard of performance and reliability for a budget price.”

Your Net Price

$ 148.55

Each

1/2" Mount Audiophile Cartridges

1042
High Output Moving Iron

TRANSDUCER CHARACTERISTICS

Frequency Response: 20 Hz. - 20 kHz. +/-3dB
Channel Balance: 2 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: 25 dB. at 1 kHz.
Sensitivity: 6.5 mV. +/-1dB at 1 kHz. @ 5 cm/sec.
Static Compliance: 24mm/N.
Equivalent Tip Mass: 1006 Elliptical, 1012GX Gyger II,
1022GX Gyger I, 1042 Gyger S
Vertical Tracking Angle: 24°.
Stylus Radius: 0.45 mg.
Stylus Type: User Replaceable.
Replacement Styli: 1042 - D42.

ELECTRICAL CHARACTERISTICS

Load Resistance: 47,000 Ohms.
Load Capacitance: 150 - 200 pF Internal.
Internal Inductance: 570 mH.
Internal Resistance: 660 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 6.3 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.7 Grams.

GOLDRING 1042 CARTRIDGE

“The 1042 is a cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user replaceable stylus. The extended groove contact of its Gyger-S diamond gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound.”

Your Net Price

$ 486.47

Each

1022GX
High Output Moving Iron

TRANSDUCER CHARACTERISTICS

Frequency Response: 20 Hz. - 20 kHz. +/-3dB
Channel Balance: 2 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: 25 dB. at 1 kHz.
Sensitivity: 6.5 mV. +/-1dB at 1 kHz. @ 5 cm/sec.
Static Compliance: 24mm/N Lateral, 16mm/N Vertical.
Equivalent Tip Mass: 1006 Elliptical, 1012GX Gyger II,
1022GX Gyger I, 1042 Gyger S
Vertical Tracking Angle: 24°.
Stylus Radius: 0.45 mg.
Stylus Type: User Replaceable.
Replacement Styli: 1022GX - D22GX.

ELECTRICAL CHARACTERISTICS

Load Resistance: 47,000 Ohms.
Load Capacitance: 150 - 200 pF Internal.
Internal Inductance: 570 mH.
Internal Resistance: 660 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 6.3 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.7 Grams.

GOLDRING 1042 CARTRIDGE

“The 1022GX is recommended for the discerning listener. The diamond stylus is a Gyger-1 fine line-contact type, which provides increased resolution and ensures the maximum accuracy of musical reproduction.”

Your Net Price

$ 486.47

Each

1012GX
High Output Moving Iron

TRANSDUCER CHARACTERISTICS

Frequency Response: 20 Hz. - 20 kHz. +/-3dB
Channel Balance: 2 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: 25 dB. at 1 kHz.
Sensitivity: 6.5 mV. +/-1dB at 1 kHz. @ 5 cm/sec.
Static Compliance: 24mm/N Lateral, 16mm/N Vertical.
Equivalent Tip Mass: 1006 Elliptical, 1012GX Gyger II,
1022GX Gyger I, 1042 Gyger S
Vertical Tracking Angle: 24°.
Stylus Radius: 0.45 mg.
Stylus Type: User Replaceable.
Replacement Styli: 1012GX - D12GX.

ELECTRICAL CHARACTERISTICS

Load Resistance: 47,000 Ohms.
Load Capacitance: 150 - 200 pF Internal.
Internal Inductance: 570 mH.
Internal Resistance: 660 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 6.3 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.7 Grams.

GOLDRING 1012GX CARTRIDGE

“The 1042 is a cartridge for the audiophile who demands the ultimate sonic performance from their system, together with the convenience of a user replaceable stylus. The extended groove contact of its Gyger-S diamond gives the 1042 unsurpassed resolution of the fine groove modulations, producing an exceptionally detailed, smooth and musical sound.”

Your Net Price

$ 398.02

Each

1006
High Output Moving Iron

TRANSDUCER CHARACTERISTICS

Frequency Response: 20 Hz. - 20 kHz. +/-3dB
Channel Balance: 2 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: 25 dB. at 1 kHz.
Sensitivity: 6.5 mV. +/-1dB at 1 kHz. @ 5 cm/sec.
Static Compliance: 24mm/N Lateral, 16mm/N Vertical.
Equivalent Tip Mass: 1006 Elliptical, 1012GX Gyger II,
1022GX Gyger I, 1042 Gyger S
Vertical Tracking Angle: 24°.
Stylus Radius: 0.45 mg.
Stylus Type: User Replaceable.
Replacement Styli: 1006 - D06.

ELECTRICAL CHARACTERISTICS

Load Resistance: 47,000 Ohms.
Load Capacitance: 150 - 200 pF Internal.
Internal Inductance: 570 mH.
Internal Resistance: 660 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 6.3 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.7 Grams.

GOLDRING 1006 CARTRIDGE

“The Goldring 1006 is designed for owners who want to get the very best from their systems at an affordable price. This cartridge has an elliptical tip for improved high frequency clarity and a powerful magnet to ensure high sensitivity.”

Your Net Price

$ 309.57

Each

1/2" Mount 2000 Series Audiophile Cartridges

G2500
High Output Moving Magnet

TRANSDUCER CHARACTERISTICS

Channel Balance: 2 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: >20 dB. at 1 kHz.
Sensitivity: 6.5 mV. +/-1dB at 1 kHz. @ 5 cm/sec.
Static Compliance: 20x.
Vertical Tracking Angle: 24°.
Stylus Radius: 2 SD.
Stylus Type: User Replaceable.
Replacement Styli: GL2500.

ELECTRICAL CHARACTERISTICS

Load Resistance: 47,000 Ohms.
Load Capacitance: 100 - 200 pF Internal.
Internal Inductance: 720 mH.
Internal Resistance: 550 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 8.2 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.7 Grams.

GOLDRING 2500 CARTRIDGE

"For use on the finest turntables, where a high output moving magnet cartridge is required. The tapered cantilever with 2 SD diamond gives a smooth but detailed sound, while the metal body delivers fine bass definition."

Your Net Price

$ 574.92

Each

G2400
High Output Moving Magnet

TRANSDUCER CHARACTERISTICS

Channel Balance: 2 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: >20 dB. at 1 kHz.
Sensitivity: 6.5 mV. +/-1dB at 1 kHz. @ 5 cm/sec.
Static Compliance: 20x.
Vertical Tracking Angle: 24°.
Stylus Radius: Vital Elliptical.
Stylus Type: User Replaceable.
Replacement Styli: GL2400.

ELECTRICAL CHARACTERISTICS

Load Resistance: 47,000 Ohms.
Load Capacitance: 100 - 200 pF Internal.
Internal Inductance: 720 mH.
Internal Resistance: 550 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 8.2 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.7 Grams.

GOLDRING 2400 CARTRIDGE

"Increased resolution is gained by the use of the low mass Vital diamond in tapered cantilever. The 2400 Cartridge has a metal body which improves bass power and clarity, this also ensures a secure connection to the arm."

Your Net Price

$ 530.70

Each

G2300
High Output Moving Magnet

TRANSDUCER CHARACTERISTICS

Channel Balance: 2 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: >20 dB. at 1 kHz.
Sensitivity: 6.5 mV. +/-1dB at 1 kHz. @ 5 cm/sec.
Static Compliance: 20x.
Vertical Tracking Angle: 24°.
Stylus Radius: Gyger II.
Stylus Type: User Replaceable.
Replacement Styli: GL2300.

ELECTRICAL CHARACTERISTICS

Load Resistance: 47,000 Ohms.
Load Capacitance: 100 - 200 pF Internal.
Internal Inductance: 680 mH.
Internal Resistance: 550 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 7.6 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.7 Grams.

GOLDRING 2300 CARTRIDGE

"Use of the acclaimed Gyger II fine line diamond offers high clarity and excellent tracking ability. This cartridge will upgrade many mid-range turntables, allowing them to produce an even finer sound."

Your Net Price

$ 353.80

Each

G2200
High Output Moving Magnet

TRANSDUCER CHARACTERISTICS

Channel Balance: 2 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: >20 dB. at 1 kHz.
Sensitivity: 6.5 mV. +/-1dB at 1 kHz. @ 5 cm/sec.
Static Compliance: 20x.
Vertical Tracking Angle: 24°.
Stylus Radius: 0.3 x 0.7 mil. Elliptical.
Stylus Type: User Replaceable.
Replacement Styli: GL2200.

ELECTRICAL CHARACTERISTICS

Load Resistance: 47,000 Ohms.
Load Capacitance: 100 - 200 pF Internal.
Internal Inductance: 680 mH.
Internal Resistance: 550 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 7.2 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.7 Grams.

GOLDRING 2200 CARTRIDGE

"Elliptical diamond stylus and plated alloy cantilever offers high definition. The super permalloy poleshoes also give superb high quality sound."

Your Net Price

$ 221.12

Each

G2100
High Output Moving Magnet

TRANSDUCER CHARACTERISTICS

Channel Balance: 2 dB. Maximum at 1 kHz.
Channel Separation at 1 kHz.: >20 dB. at 1 kHz.
Sensitivity: 6.5 mV. +/-1dB at 1 kHz. @ 5 cm/sec.
Static Compliance: 20x.
Vertical Tracking Angle: 24°.
Stylus Radius: 0.3 x 0.7 mil. Elliptical.
Stylus Type: User Replaceable.
Replacement Styli: GL2100.

ELECTRICAL CHARACTERISTICS

Load Resistance: 47,000 Ohms.
Load Capacitance: 100 - 200 pF Internal.
Internal Inductance: 550 mH.
Internal Resistance: 550 Ohms.

MECHANICAL CHARACTERISTICS

Cartridge Weight: 7.2 Grams.
Mounting: Standard 1/2" (12.7mm) Mounting Centers.
Recommended Tracking Force Range: 1.5 - 2.0 Grams.
Recommended Tracking Force (Nominal): 1.7 Grams.

GOLDRING 2100 CARTRIDGE

"This is a phono cartridge with wide dynamics utilizing an elliptical diamond stylus to produce high frequency clarity and quality sound. The 2100 can be used to upgrade many budget turntables."

Your Net Price

$ 176.90

Each

PHONO CARTRIDGE MOUNT TYPES
1/2" Mount	P-Mount	Convertible or Universal
		Fits both Half-inch and P-mount