FURMAN |
|
PRO SERIES 20 AMP UNITS |
PL-PRO
Power Conditioner / Light Module
- 20 Amp/2400 Watt rating handles even the largest
power amps (16 Amp/3600 Watt rating for 230V "E" suffix versions) .
- Multiple levels of protection components can safely
absorb large spikes and provide highly effective RF filtering.
- The most comprehensive protection available
anywhere!
- Extreme Voltage Shutdown guards against destructive
wiring faults.
- Critical functions are monitored by a
"smart" microprocessor; LED status indicators report on problems.
- Precision magnetic circuit breakers (PL-PRO, PM-PRO
only).
- Heavy duty 10 foot, 12 gauge line cord.
- Eight widely-spaced, switched rear outlets and one
unstitched front outlet.
|
Average
Resale Price
$399.00 |
$300.45 |
|
PL-PRO
SPECIFICATIONS:
- Current rating, 120V versions: 20 Amps (2400 Watts
at 120 VAC).
- Input Voltage: 0 to 264 VAC without damage.
- Meter Accuracy: Voltmeter: ±2 VAC; Ammeter: ±2
amps, calibrated with trimpot adjustments.
- Spike Protection Modes: Line to neutral, neutral to
ground, line to ground.
- Spike Clamping Voltage, 120V versions: TVSS rating
400V peak, L-N, N-G, L-G (tested to UL 1449).
- Response time: 1 nanosecond.
- Maximum surge current: 11,000 amps (8 x 20mS
pulse).
- Maximum spike energy: 550 joules total.
- Noise attenuation: Differential mode: Greater than 40 dB;
Common mode: greater than 60 dB; both 1 to 200 MHz.
- Mechanical: Dimensions: 1.75" (4.375 cm.) H x
19" (47.5 cm.) W x 8" (20 cm.) D.
- Weight: 6 lbs. (2.7 kg).
- Construction:
- Steel chassis, zinc chromate plating; 0.125"
brushed and black anodized aluminum front panel; glass epoxy printed circuit boards.
- Power Consumption: PL-PRO, 32 watts.
- Safety Agency Approvals: UL, C-UL, CE listed.
|
|
STANDARD SERIES 15 AMP UNITS |
PL-8
Power & Light Module
- Two slide-out, swiveling light fixtures for rack
illumination .
- Dimmer control for lamp brightness .
- Eight accessory outlets in rear controlled by front
switch .
- Triple-mode varistor spike and surge protection .
- RFI filtering .
- 15 amp rating, with circuit breaker .
- Separate switch for lamps.
|
Average
Resale Price
$159.00 |
$121.76 |
|
|
PL-PLUS
Enhanced Power & Light Module
- Two slide-out, swiveling light fixtures for rack
illumination .
- Dimmer control for lamp brightness .
- Eight accessory outlets in rear controlled by front
switch .
- Triple-mode varistor spike and surge protection .
- RFI filtering .
- 15 amp rating, with circuit breaker .
- Separate switch for lamps.
- Line voltage monitor reads 90 to 128 volts .
- Improved RFI filtering with multi-stage filter .
- Ten foot heavy duty AC cord.
|
Average
Resale Price
$229.00 |
$172.45 |
|
|
COMMON
PL-8 & PL-PLUS SPECIFICATIONS:
- Current rating: 15 amps ("E" versions 10
amps).
- Input Voltage: 85 to 135 VAC ("E"
versions 0 to 255 VAC).
- Meter Accuracy: PL-PLUS Voltmeter: ±3 VAC; PM-8
Voltmeter: ±5 VAC; PM-8 Ammeter: ±2 amps, calibrated with internal trimpot adjustments.
- Spike Protection Modes: Line to neutral, neutral to
ground, line to ground.
- Spike Clamping Voltage: Initial turn-on at 200
volts; TVSS rating of 400 volts peak at 500 amps, L-N, N-G, L-G (tested to UL-1449)
(Initial turn-on for"E" versions, 390 volts peak L-N; 680 volts peak N-G, L-G).
- Response time: 1 nanosecond.
- Maximum surge current: 6,500 amps.
- Maximum spike energy: 80 joules per mode, 240
joules total protection ("E" versions 130 joules L-N, 160 joules N-G, L-G, 450
joules total).
- Noise attenuation: PL-PLUS, PM-8: Transverse and common
modes: 20 dB at 200 kHz, rising to >40 dB, 1 to 100 MHz.
- Mechanical: Dimensions: 1.75" (4.375 cm.) H x
19" (47.5 cm.) W x 8" (20 cm.) D.
- Weight: 6 lbs. (2.7 kg).
- Construction:
- Steel chassis, zinc chromate plating; 0.125"
brushed and black anodized aluminum front panel; glass epoxy printed circuit boards.
- Power Consumption: PL-8 & PL-PLUS, 20 watts.
- Safety Agency Approvals: UL, C-UL, CE listed.
|
Note: Some Market Restrictions May Apply.
|